LYA Plastic concrete block mould
This is our newest design of block mould, made of PP(EP200K) plastic, with size of 400*200*200mm for the full mould, 200X200X200mm for the half mould. Warranty for this mould can be above 1500 times, just need a vibrating table and pan mixer then you can do producing, it's a perfect choice for a small and medium-sized factory.
It can replace the normal block machine to produce the concrete blocks for your house building, also the final block from this mould is with smooth surface and easy to paint and decorate the indoor and outdoor wall. Most importantly, this block can be 100% interlock together which will save more cement during building and more stable structure for the whole house.
With this mould, Blocks/Bricks can be made with unskilled labor on site, Construction can be achieved with unskilled labor. Now this block is widely used in Thailand, Malaysia, Arab countries, and Africa countries, as it is in advantage of saving transport costs, saving energy, fasting building and longevity.
Step 1, Oiling the moulds- all surfaces exposed to cement
A, use gearbox oil for first time, this is Essential.
B, use cooking oil on its own or mix 50% diesel 50% oil(used cooking oil will also work)
C, Do not use any other oils, these will damage your moulds.
D, Use a brush or spraygun to coat the moulds. Do not miss a spot.
E, Oil aluminium strips for easy release.
F, pack moulds face down to drain any excess oil
G, assemble moulds red with yellow.
1. Aluminum alloy clip, solid product not to be out of shape
2. Weight 1.4 kg, at least 3 years warranty
3. Mold internal smooth surface, easy mold release, not concrete, convenient cleaning
4. Use of iron oxide pigments, not easy fade
5.We are the original designer,the complete house building drawing with blocks can be offered.
6.The smooth inner lip make the molds easier to release.