Product Description
High quality Paving stone mold .
Made from strong ABS plastic. very durable.
All of our molds can be used with concrete, cement, plaster, resin.
1 Mold to make Paving stone Krakow Square ornament. 
With this purchase you will get 1 mold.
These molds set cover an area approximately 1.77  sq ft. 
These can be used for create concrete paving stone slab.
 
Name Model Size Color  Material Packing Lifetime Place of Origin
Plastic paver mold LY-300 300*300*25mm White  PP Bags More than 800times Henan,China(Mainland)

Filling Molds Tips:

1. Begin by pouring only about 1/3 of the mortar or concrete mixture into the mold.

2. Gently shake and tap the bottom and sides of the mold to eliminate all air bubbles. Continue by pouring the mixture in small batches stopping each time to shake and bounce out the air bubbles. When filled, the top of the

concrete/mortar should be flat and even. For better quality suggest to use vibration table.

3. Keep the mold in a dry area to cure for 24 hours on a level surface in moderate temperature.

Demold:

Gently turn the mold upside down onto a soft surface, like a piece of carpet for example, and pull sides away very gently from concrete and tap lightly on the back.

Do not walk on your stones for several days to make certain the mortar is set all the way through the stone. Maximum strength concrete is 28 days

 

Zhengzhou LYA Mould Co.,Ltd.

CONTACT US



  198 floor 17 sheng long you yi cheng Building A Kuexue & Changchun Rd,Gaoxin district ,Zhengzhou ,Henan Province ,China.

   +8615225163054

  Harvey_lya@zzlya.com

   Name   Name2